|
The Model 132C incorporates
versatility, rapid setup and accuracy into a rugged and affordable
machine. It has a .080" (2 mm) to 1.25" (32 mm) diameter capacity and
it can grind tools with 1, 2, 3, 4, 5, 6, 7, 8, or 10 flutes. 
Our
unique design features point splitting and web thinning capability and
it allows quick grinding of almost any HSS or carbide drill point. The
proper geometry for the application can maximize drilling performance to
provide the lowest cost per hole.
Stepdrills, taps, reamers,
countersinks and endmill ends are easily ground with minimal setup
changes. In addition, the standard workhead can be exchanged in
less than one minute with the optional air-bearing attachment for
grinding endmill ODs. |
The
power-driven workhead of the semi-automatic version offers a quiet,
smooth rotation of the workhead. Manual effort is reduced for
heavier grinding and spin grinding operations. Sparkout is allowed
to occur by using a minimum of manual infeed along with a reduction
in workhead rotation. The speed is controlled by a conveniently
located valve; the adjacent four-way valve allows grinding in either
direction. A hand knob on the workhead is used for indexing and
setup.
